加工定制：是品牌：?？怂箍敌吞枺?00*700*500

　　類型：全自動三坐標測量機定位精度：0.0023(mm)外形尺寸：1025*1480*2431(mm)

　　適用范圍：五金沖壓模具塑膠注塑汽車電子玩具

　　A. 主機Machine：

　　global classic SR系列三坐標測量機是Hexagon計量產業集團新一代高性能活動橋式測量機。高穩定性的測量系統，能夠快速有效地完成通用的車間檢測需要，大大提高了檢測效率。

　　X向橫梁采用海克斯康獲得專利的TRICISIONTM式(精密三角梁)橫梁設計，提供剛性質量比：輕合金橋架較傳統設計剛性提高25%，X向?qū)к壷匦慕档?0%,從而保證了平穩、精確的運動。移動橋上的軸承跨距更寬，降低了由于橋架自轉導致的誤差，保證了整機空間精度更高;同時降低了重復性誤差，提高了速度和加速度，使得測量效率更高。

　　global classic SR集單點觸發和連續掃描功能于一身，可配備多種測頭系統，如接觸式和非接觸掃描測頭。通過配備新一代高穩定性的控制系統，并結合溫度和精度補償系統對測量機性能進行優化，再加上先進的算法，global classic SR支持高速、高精度模擬開環以及閉環掃描。該測量機采用獲得專利的快速探測模式的指向、點擊和掃描技術，可把掃描測頭當作觸發式測頭使用，而不會損失速度和精度。

　　Global classic SR is the latest generation of moving bridge style Coordinate Measuring Machine (CMM) from Hexagon Metrology. The high stability of measuring system can handle any common shop measurement and inspection tasks, therefore improve your inspection throughput.

　　Distinctive TRICISIONTMbridge design for X beam provides optimum stiffness-to-mass ratio. The light alloy bridge is 25 percent stiffer than traditional designs and the X rail has a 50 percent lower center of gravity for smooth, precise movement. Wider bearing separation than competitive bridge designs assures improved control of bridge axis roll for precise volumetric measuring accuracy, reduced repeatability errors, increased acceleration/deceleration and greater measuring throughput.

　　Global classic SR combines single-point probing and analog scanning in a single high performance measuring machine, also can equipped with contact or  non-contact probe system. Based on the new generation of controller combines, optimizes temperature and accuracy compensation systems and advanced algorithms, global classic SR can support high-speed, high-accuracy analog open and closed loop scanning. The FastProbeTMfeature of Point, Click and Scan Technology allows a scanning prove to be used as a touch trigger probe with no loss of speed or  accuracy.

　　· 技術特點

　?、?X向橫梁采用超高剛性精密三角梁(Tricision ?)技術，通過減輕運動負荷從而提高了整機的性能，是保證穩定性和剛性的結構設計;該技術受到專利保護。

　?、?標配機器與工件的線性溫度補償技術。

　?、?Y軸采用海克斯康獲得專利的整體燕尾型導軌，提高了測量機的精度和重復性。

　?、?三軸均采用同步帶驅動，結構緊湊、不打滑、速度快、噪音低、易維護。

　?、?Z軸采用可調氣動平衡，運動平穩;并可在緊急情況下自動制動，保證安全。

　?、?三軸均采用德國海德漢鍍金光柵尺，其熱膨脹系數的準確度及均勻性經德國國家標準局(PTB)認證，確保準確穩定的溫度補償。

　?、?配備的坐標測量軟件，可滿足各種測量需求,已成為測量業界的標桿。

　?、?可選配CLIMA溫度補償選項，使得測量機可在更寬溫度范圍(16~26°C)內保持高精度。

　?、?可提供專業的一體化設計方案(包括地基、減震、空調間、上下料等)。

　　· Technical Highlight

　?、?X beam has adopted the patented ultra rigid “Tricision ?” technology. This structure is the best solution to lighten main carriage’s weight and improve main carriage’s stability and rigidity, so can greatly improves CMM’s performance.

　　② Linear thermal compensation is implemented as a standard feature on all machine axes and the measured part.

　?、?Patented precision-machined dovetail guideway in Y axis improves CMM’s accuracy and repeatability.

　?、?All machine axes’ transmission mode is timing belt, whose compact, nonskid structure makes it has excellence of high speed, low noise and easy maintenance.

　?、?Pneumatic counterbalance (adjustable) for Z axis, which makes Z axis operate stably, with automatic brake on emergency condition and keep CMM in safety.

　?、?The scales (gold and steel) of German Heidenhain are certified by PTB (Physikalisch-Technische Bundesanstalt), a German national institute of science and technology. Their excellent veracity and coherence of thermal expansivity ensure the exact and stable thermal compensation.

　?、?As the leader, global classic SR equipped with the powerful measuring software which second to none, can meet every measurement requirement.

　?、?Equipped with optional CLIMA structural temperature compensation option, global classic SR will be able to work at temperature varying between 16 -26°C with high precision.

　?、?Hexagon metrologyQingdao could provide professional integrated solution, including foundation, damping, air-condition room, load and unload system, etc.

　　· global classic SR性能指標global classic SR Specifications

　　行程范圍(mm)

　　Measuring Strokes外形尺寸(mm)

　　Overall Dimension主機重量

　　(Kg)

　　Machine Weight被測工件大重量

　　(Kg)

　　Max. Part Weight

　　XYZLxLyLz

　　500700500102514802431620227

　　精度指標：(根據ISO10360-2坐標測量機的性能評定標準)(Accuracy is according to ISO 10360 – 2)

　　大允許示值誤差MPEE(mm)

　　Maximum permissible error of indication of a CMM for size measurement (mm)大允許探測誤差MPEP(mm)

　　Maximum permissible Probing Error (mm)

　　2.3 + 3.3L/10002.3

　　動態性能Dynamic Performance

　　3D運動速度(mm/s)3D positioning speed3D運動加速度(mm/s2)3D acceleration

　　5201732

　　· 環境條件要求Environment Specifications:

　　測量機室溫度要求：Room Required Specifications

　　房間溫度(溫控間) Room Temperature18～22°C

　　溫度梯度(時間) Temperature Gradient (in time)1°C /h

　　溫度梯度(時間) Temperature Gradient (in time)2°C /24h

　　溫度梯度(空間)Temperature Gradient (in the volume)1°C /m

　　測量機室濕度要求：Humidity Required Specifications

　　空氣相對濕度Relative humidity25-75%

　　氣源要求：Air Supply System Required Specifications

　　小供氣壓力Min. air pressure5 bar[0.5 MPa]

　　耗氣量Air consumption150 NL/min

　　電源要求：Electrical requirements

　　電壓Voltage220 V±10%

　　頻率Frequency50/60 Hz

　　電流Current15 A

　　用電設備要求接地可靠：接地電阻小于4歐姆

　　A good earth ground (less than 4W) is required for reliableoperation of the electrical controls.

　　備注：滿足環境條件要求的方法具體可參考《機房施工指南》

　　Note: The Site Preparation Guide will help customer to know how to reach the Room Requirements.

　　· 控制系統Controller

　　global classic SR的控制系統

　?、?是一種高效的直流伺服系統。

　　② 可支持各種觸發式測頭、模擬掃描測頭和非接觸式測頭。

　?、?采用了高速運動控制芯片，使得測量機的各軸運動形成了獨立的閉環系統，在高效運作的同時保持高精度。

　?、?獨特的飛行特性減少了運動中的停頓和拐角，從而確保測量機的工作效率及運行的穩定性。

　　⑤ 經過嚴格的可靠性與安全性國際認證(如CE認證)。

　?、?整體式結構既具有良好散熱效能，又起到了良好防塵效果。

　?、?控制柜有兩種類型的總線：DEA總線和ISA總線。這種總線設計使得功能的擴展變得非常容易。

　?、?Global classic SR controller is a high speed measurement & direct current servo control system.

　?、?It is capable of supporting touch trigger probing system as well as other probing systems, such as analog scanning probing system and non-contact probing system.

　?、?The controller contains the leading technology Hexagon Metrology customized high speed control chips, each chip providing three high speed hardware position latched for each moving axis. So CMM’s axes can always move at high speed with high precision.

　?、?The special 3D vector capability (FLY) enables the movement of three axes to be integrated by eliminating stops and corners. So global classic SR’s axes can always stably move at very high speed, thus makes the inspection throughput to be improved.

　?、?The controller has passed the strict international reliability & safety certification system, such as CE certification systemof Europe.

　?、?This dustproof structure can effectively cool controller.

　?、?This controller has two types of bus: the standard DEA bus and ISA bus. This kind of design is easy to make additional expansion.

　　控制系統主要技術參數：Technical Characteristics

　　安全等級IP54 (依據EN60204標準)

　　protection class IP54 according to EN60204

　　溫度范圍Operating Temperature range5-40°C

　　電源要求Single phase230 V±10%; 50 Hz

　　功率Power1500 VA

　　相對濕度Relative humidity20~75 %

　　B. 軟件系統Software System

　　· PC-DMIS PRO (DCC)測量軟件Measuring & Inspection Software

　　憑借超過30,000套的安裝，PC-DMIS被業界公認為功能強大的通用測量軟件。融合Hexagon計量產業集團多年來積淀的深厚的應用實踐經驗及對廣大用戶需求的精準把握，PC-DMIS緊跟信息與測量技術發展的步伐，可兼容新技術的32位、64位Windows 7操作系統和形位公差標準。

　　人性化的操作方法、直觀的操作界面、可個性化定制的檢測報告以及智能化的特征自動識別與多語言在線幫助，使得該款軟件易學、高效、實用，適合廣泛的測量需求，能夠幫助企業快速提升坐標計量和產品質量控制能力，實現高效快捷的質量檢測和過程控制。

　　With over 30,000 seats in place, PC-DMIS is recognized as the world’s most capable CMM metrology software. As the benchmarking software of metrology industry in the world, PC-DMIS combines Hexagon coordinate measurement in the industry for many years practical experience in the application of deep and precise needs of the users to grasp. Meantime PC-DMIS also supports windows 7 based on 32 –bit and 64-bit operation system.

　　Humane methods of operation, an intuitive user operation interface, test report customization and intelligent features of automatic identification and multi-language online help, which makes this software practical and suitable to learn, efficient, for a wide range of measurement needs, can help enterprises rapidly coordinate measurement and product quality control, to achieve fast and efficient quality inspection and process control.

　　具有快速啟動窗口和定制化的操作界面，簡便易學，能夠使客戶在短的時間內掌握該軟件的應用，同時，還具備復雜零件編程功能，主要面向沒有CAD模型進行基本形位公差測量的客戶。

　　With a Quick Start window and customizable interface, PC-DMIS PRO is easy to learn, enabling customers in the shortest possible time to master the software applications, is also programmed with complex parts, mainly for the CAD model is not the basic geometric tolerance measurement customers.

　　這一具有強大檢測功能的工業級計量軟件，操作簡便，能夠幫助用戶完成零件檢測程序編程、測量程序初始化設定以及執行檢測程序。運用先進的圖形化報告功能，實現用戶特殊的檢測數據分析需求。直觀化的自學習功能，在不需要CAD模型的情況下，實現用戶零件檢測編程。獨特的零件特征識別功能，針對不同測量點的探測，自動識別測量元素的類型(線、圓、圓柱，等等)。在完成工件特征檢測之后，PC-DMIS PRO (DCC)能夠自動定義被測元素類型，提供所需信息和屏幕分析圖形，這種動態圖形通過被測幾何元素之間擬合，實現被測工件的元素構造。

　　PC-DMIS Pro同時提供了圓、圓柱、直線等常用特征的基本掃描功能，實現高密度快速掃描測量。

　　This powerful industrial metrology software features an easy-to-use operator interface that guides your through part programming, setup and inspection routine execution. Advanced graphics reporting functions let you configure inspection results to meet your specific data analysis needs. One of the features of PC-DMIS PRO (DCC) is its intuitive self-teach capability that allows programming a part on the CMM without the help of a CAD file. The unique capability of PC-DMIS PRO (DCC) is its ability to recognize the feature type (line, circle, cylinder, etc.) from the points taken to measure it. After the measurement of a feature is completed, PC DMIS PRO (DCC) automatically defines the type of the element you measure, gives you the essential information, and draws the feature of the part on the screen. And this dynamic drawing is useful for the operator to realize the feature construction function through the integration of the defined element with the other features.

　　PC-DMIS Pro can also provide basic scan to perform the high density scanning effectively. Such as circle, cylinder, line etc.

　　PC-DMIS提供了如下先進的性能Main Features：

　　具有中文版用戶操作界面和在線中文幫助

　　具有靈活方便的可定制化圖形用戶界面(GUI)，為不同軟件應用水平的操作者提供了便捷的執行功能和強大的計量方法

　　提供了快速啟動界面：按照操作提示快速進行測頭系統的管理和應用操作、零件坐標系管理和應用操作、所需幾何特征的測量、構造和公差評價

　　提供了功能強大的形位公差的評價，包括：直線度、平面度、圓度、圓柱度、圓錐度以及各種復雜曲面的輪廓度等。相對基準幾何要素位置度的評價：平行度、垂直度、角度、對稱度、位置度、同軸度、同心度、軸向跳動、徑向跳動、軸向全跳動、徑向全跳動

　　可實現工件幾何特征量的直接測量，并能夠完成幾何關系的計算、構造和形位公差的評價與分析

　　提供了豐富多樣的檢測報告標準模版，同時還提供了個性化定制功能，使檢測報告輸出增加了報告格式和數據處理上的靈活性

　　PTB完全認證

　　提供ISO及ANSI標準的公差評判能力，并兼容了GD&T 2009版的新功能

　　Chinese language and Chinese on line help available.

　　A fully configurable, intuitive graphic user interface (GUI) provides users of all skill levels with easy access to powerful measurement routines.

　　One click start routines for: probe qualification and management, part alignments, reports, preview assistant, feature construction and feature measurement

　　Form evaluations of geometrical elements: Straightness, Flatness, Roundness, Cylinder form, Conical form, Torus form, and Spherical form. True position of an element with reference to the datum(s):Parallelism, Squareness, Angularity, Symmetry, Position, Coaxiality, Concentricity, Axial runout, Radial runout, Total axial runout, Total radial runout

　　Geometric features measurement, geometric relations calculation & construction, form and position tolerance evaluation.

　　Versatile reporting templates allow a new flexibility in report formatting and data handling.

　　Full PTB certification.

　　Follow the GD&T rules of ISO and ANSI, and added the new functions in GD&T 2009 version.

　　C. 測頭系統Probe System

　　· TESASTAR-m自動分度測座Motorized indexable head

　　TESASTAR-m可在豎直水平兩個方向自動旋轉，5°的精細分度量確保有多達2952個測頭角度組合.旋轉90°僅需兩秒鐘，可配置長達300mm的加長桿;可連接各種觸發式測頭、模擬掃描測頭和非接觸式測頭。

　　TESASTAR-m can rotate in horizontal and vertical direction freely. It can be precisely indexed to reach 2952 highly repeatable attitudes with fine (5°) angular index increments. Its index speed is 90° in 2 seconds and can handles up to300 mmlong probe extensions. TESASTAR-m is capable of connecting touch trigger probe as well as other probing systems, such as analog scanning probing system and non-contact probing system.

　　技術參數(Characteristics):

　　分度角A(俯仰)Indexable axis A (Pitch)from -115° to90°, step of 5°

　　分度角B(旋轉)Indexable axis B (Roll)±180°, step of 5°

　　總位置數(Total number of position)2952

　　重量(Weight)770 g

　　旋轉扭矩(Rotation Torque)0.6Nm

　　定位重復性(Positioning repeatability)0.5μm

　　旋轉一個分度的時間(Max. time for turning 1 index step)1s

　　旋轉90度的時間(Max. time for turning 90°)2s

　　加長桿大長度(Max. Extension bar)300 mm

　　· TESASTAR-mp測頭，含一個標準測力吸盤TESASTAR-mp probe with a standard force module

　　TESASTAR-mp觸發測頭由測頭體和吸盤兩部分組成，不需重復校驗就可手動或自動更換吸盤，更換精度可保證2μm。它使用通用M8螺紋連接，因而可適用于現有的大部分的手動或自動測座。同時具有四種不同的形式，可提供從0.055 N到0.10N之間不同的標定探測力,是進行快速精確測量的理想選擇。

　　TESASTAR-mp is a touch-trigger probe consisting of two main parts, one probe body and one mounting module. It could ensure a repositioning repeatable within 2μm whilstallowing manual or automatic probe changing with no need of recurrent qualification. The common M8 threaded connection permits a direct assembly with nearly all existing measuring heads, whether manually operated or  motor driven. There are four modules available could provide varying measuring forces from 0.055 N to 0.10 N. TESASTAR-mp is the ideal solution for fast and accurate coordinate measurement of part features.

　　TESASTAR-mp SF標準力測頭技術指標(Standard Force Probe Technical Features)

　　測量方向(Measuring Direction)5

　　1維重復性(Repeatability limit)0.35μm

　　固定(Mounting)M8

　　探針固定(Stylus Mounting)M2

　　小探測力/探針長度(Triggering Force/Styli length)0.08N/10 mm

　　大測針長度(Max. Styli length)50mm

　　大直徑(Diameter)13.5 mm

　　長度(含M8螺紋)(Length from M8 thread)42.1mm

　　重量(Weight)24.6g